Model Description: TISCO 2000 SERIES Air Release Valve are installed at high point of the line to release unwanted air pockets during system operation. The valves maintains system flow efficiency & Protects system against air related surges. Design and operation: > Body & Cover ductile iron > Internal Float Stainless Steel > Size: 1/2", 3/4" & 1" > Maximum Operating…
Model Description: TISCO TBV Series Valves are Low Pressure Lever Operated Ball Valves used for ON/OFF of flow just by turning the handle Quarter turn. Design and operation: > High Flow capacity in Compact size Valves. > Balls are Blow out proof. > 100% factory Tested. > Super finish Ball for effective sealing. > Working pressure of 1500psi & 3000psi.
Model Description: TISCO 1000 SERIES Automatic Air Vents are installed to eliminate residual air in heating and air conditioning systems without the need for manual intervention. This prevents undesired noise, wear of devices in the circuits and inefficient performance of heating units. Design and operation: > Body & Cover brass construction > Internal Float high-temperature resistant polyethylene > Size: 3/8"…
Model Description: TISCO Gauge Saver is also sometimes called as Over Load Protector . It cuts off pressure rises above the desired pressure value (pre-set value) thus preventing failure of pressure gauge and stops possible damages such as hazardous leakages, explosions etc. The Gauge Saver shuts off the system with quick and positive action of built in push-rod device. As…
Model Description: The TISCO Gauge Cock are designed to shut off the flow of the process media to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Gauge Cock may also be used to throttle flow and aid in dampening pulsations. TISCO Gauge Cock are constructed from brass for use on…
Model Description: "TISCO offers a variety range of 2, 3 & 5 Valve Instrument Manifold, which are designed for safety, reliability and positive LEAK TIGHT sealing of process fluid, static Pressure and for differential pressure application in a wide range of Instrumentation. These Manifold gives the user greater flexibility, because these offers a variety of simple configuration of easy Block,…
Model Description: The TISCO Needle Valve are designed to shut off the flow of the process media to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service. Needle valves may also be used to throttle flow and aid in dampening pulsations. TISCO Needle Valves are constructed from brass, carbon steel and…
Model Description: TISCO Pressure Snubbers are intended to suppress the effect of pressure pulses and pressure peaks. The pressure gauge snubber is provided with an adjustable needle valve that enables to restrict the flow as operating conditions may demand even if the snubber is in service. The carefully adjusted snubber will considerably increase the service life of pressure gauges. Design…
Model Description: TISCO Siphons are used mainly to protect pressure instruments, gauges, switches and transmitters directly coming in contact with high temperature process fluids or vapours These are mounted between process and pressure instrument. They reduce process pulsation and generate cooling effect to save the instruments. Design and operation: >Pigtail, Coil and “U” type shapes >Pipe Schedule #40 or #80…
Model Description: A Thermowell is a protective enclosure for Temperature Gauges, Thermometers and Temperature Sensors ( Inserts), which enhance the life of the Inserts from the corrosive and abrasive( harsh) service conditions at the installation point without affecting the performance of the Temperature Sensors or Gauges. A Thermowell allows the temperature sensor to be removed and replaced without compromising either…
Model Description: A Thermowell is a protective enclosure for Temperature Gauges, Thermometers and Temperature Sensors ( Inserts), which enhance the life of the Inserts from the corrosive and abrasive( harsh) service conditions at the installation point without affecting the performance of the Temperature Sensors or Gauges. A Thermowell allows the temperature sensor to be removed and replaced without compromising either…
Model Description: A Thermowell is a protective enclosure for Temperature Gauges, Thermometers and Temperature Sensors ( Inserts), which enhance the life of the Inserts from the corrosive and abrasive( harsh) service conditions at the installation point without affecting the performance of the Temperature Sensors or Gauges. A Thermowell allows the temperature sensor to be removed and replaced without compromising either…
